The Intrinsically Safe (IS) Mining Anemometer is a battery-powered electronic anemometer for underground mining. The IS Pocket Mining Anemometer makes taking ventilation readings real easy, with this small handheld unit that can fit in your shirt pocket.
The IS Pocket Anemometer's audible signal lets you know when the 60-second count has started, counting and ends. The LCD display can be programmed to read in metric mode in seconds. Used world wide. English / Metric
With Quick Spot Checks... Has Instantaneous feet-per-minute mode, you can check air speeds behind line curtains, on longwall faces, over conveyor belts, anywhere you need to verify airflow.
Includes a 60-second count of feet-of-air. As you walk the meter across the entry, it automatically stops counting feet-of-air after 60 seconds. The count can be stopped for a partial reading. An audible alarm informs you when the count starts, stops and at 15-second intervals.
The IS Pocket Mining Anemometer measures/features
- Simple Two-Push Button Control
- Measure Air Flow
- Instantaneous Velocity Mode
- Adjust Buzzer Tone
- Count Mode
- Quick Spot Checks
- Dustproof
- Protective cover with sure-grip overmolding
- No Calibration
- Large easy-to-read display with backlight
- Waterproof and floats
- User-replaceable impeller
- Place of Origin: Philadelphia, PA USA
The IS Pocket Mining Anemometer Includes
- A slip-on protective storage case
- Neck lanyard
- CR2032 coin cell battery (Average life 300 hours)
Specs/Certificates/Brochure
- IS Pocket Mining Anemometer (PDF) Instructions English
- IS Pocket Mining Anemometer (PDF) Brochure English
- Kestrel Meters Catalog (PDF)
- MSHA Approval # 18-A070014-0
- MSHA Certficate (PDF)
- Dimensions: 4.8 x 1.7 x .7 in. / 122 x 42 x 18 mm
- Case Dimensions: 4.8 x1.9 x 1.1 in. / 122 x 48 x 28 mm
- Weight: 2.3 oz. / 65 grams / Case: 1.3 oz. / 37 grams
- Place of Origin: USA